Name: HX1T-AB1
Brand: IDEC

IDEC HX1T-AB1 membantu operator mengaktifkan Emergency Stop (E-Stop) dengan lebih cepat, mudah, dan nyaman. Desain ergonomisnya mengurangi gaya yang diperlukan saat menekan tombol darurat, sehingga sangat bermanfaat pada aplikasi yang membutuhkan respons cepat demi menjaga keselamatan personel maupun mesin.

‍

Dirancang untuk melengkapi tombol IDEC Emergency Stop, HX1T-AB1 cocok digunakan pada berbagai mesin industri, panel kontrol, hingga lini produksi yang mengutamakan standar keselamatan tinggi. Solusi ini membantu meningkatkan aksesibilitas E-Stop tanpa mengubah fungsi keselamatan dari perangkat yang digunakan.

‍

Sebagai Distributor Resmi IDEC di Indonesia, PT Lestari Elektrik Otomasi siap menyediakan produk IDEC original beserta konsultasi teknis untuk mendukung implementasi sistem keselamatan mesin sesuai kebutuhan industri Anda.

‍

Applications

‍

Mesin produksi otomatis
Panel kontrol industri
Mesin packaging
Conveyor system
Robot dan robotic cell
Mesin perakitan (Assembly Machine)
Food & Beverage Processing
Pharmaceutical Manufacturing
Automotive Manufacturing
Machine Safety System

‍

Tingkatkan keselamatan operator dan mesin dengan IDEC HX1T-AB1 Assist E-Stop. PT Lestari Elektrik Otomasi siap membantu Anda memilih solusi Machine Safety yang tepat, mulai dari konsultasi teknis hingga penyediaan produk IDEC original. Hubungi kami sekarang untuk mendapatkan informasi produk dan penawaran terbaik.

IDEC HX1T-AB1: Spesifikasi Teknis

Spesifikasi		HX1T-AB1
General Specifications
Type		Wireless switch transmitter
Applicable Standards		UL/cUL 62368-1, EN IEC 62368-1 (CB test certificate), EN 300 328, EN 301 489-1, EN 301 489-17, EN 61000-6-4, EN 61000-6-2
Radio Law Certification		FCC (USA), ISED (Canada), MIC (Japan), Radio Equipment Regulations (UK), Radio Equipment Directive (Europe), SRRC (China)
Environmental Specifications
Operating Ambient Temperature (No Freezing)		-10 to +35°C (for wearable use) -10 to +40°C (for non-wearable use) 0 to +40°C (while charged via USB) -10 to +50°C (*1)
Storage Ambient Temperature (No Freezing)		-20 to +45°C
Operating Ambient Humidity		30 to 85%RH (no condensation)
Storage Relative Humidity		30 to 85%RH (no condensation)
Corrosion Resistance		Free from corrosive gases
Electrical Specifications
Rated Input Voltage		Power: Lithium-ion polymer secondary battery Charging: Type-C DC5V 100mA
Current Draw		2mA Charging current: 100mA (0.5W)
Input Voltage Range		Power: Lithium-ion polymer secondary battery Charging: USB 4.4 to 5.25V
Rated Insulation Voltage		No insulation
Mechanical Specifications
Mechanical Durability		Stop switch: 50,000 operations min. Power/communication check button: 500,000 operations min.
Shock Resistance		Operating extremes: 147m/s² Endurance: 147m/s²
Vibration Resistance		Frequency 5 to 8.4Hz, Amplitude 3.5mm Frequency 8.4 to 150Hz, Acceleration 9.8m/s²
IP Performance (Degree of Protection) (*2)		IP65
Structure Specifications
Material (Main Enclosure)		Case, cover, handle: PA66 Rotary SW cover: silicon ASA PC board FR4
Material (PC Board)		FR4
Mounting		Wrist strap
Weight (approx.)		60g

*1) The ambient operating temperature limit varies depending on the mounting orientation. For details, see "Restrictions depending on mounting orientation" on page 18.
*2) Degree of protection in non-charging state. IP20 when connected with a USB cable during charging.

* Specifications are subject to change without prior notice. Please refer to the official IDEC datasheet for the latest technical information.