Automation
Industrial Control
Safety Machinery
Explosion Proof Hazardous Devices
PLC
HMI
Servo
Power Supply
Fatek IoT
Advanced Series
Economic Series
Headless Series
Web Panel Series
cMT Viewer Panel Series
Industrial Controller
Sensor
Snap Signal
RFID TURCK
Controller
Sensor
Power Supply
Converter
Ethernet Switch
Gateway
Modbus Concerator
Power Meter
LoRa
No items found.
Inverter
Alarm Annuciator
Hour meter & Counter
Monitoring Devices
No items found.
No items found.
No items found.
No items found.
No items found.
No items found.
No items found.
No items found.
No items found.
Home

>

AUTONICS

>

Remote I/O System

>

ARIO Series

ARIO Series
ARIO Series
ARIO Series
No items found.

ARIO Series

Autonics ARIO Series merupakan sistem Slim Modular Remote I/O yang mendukung berbagai protokol Industrial Ethernet dan Fieldbus untuk aplikasi Smart Factory. Dengan desain modular, fitur hot-swap, push-in wiring, serta ekspansi hingga 64 modul I/O, ARIO memudahkan integrasi dan pemeliharaan sistem otomasi industri.

  1. Industrial Ethernet/Fieldbus serial communication I/O for Smart Factory
  2. Multiple I/O distribution control using PLCs and industrial PCs.
  3. Coupler: available in 8 different communication protocols
    • EtherCAT
    • CC-Link V1/V2
    • ProfiNet
    • ProfiBus
    • EtherNet/IP
    • DeviceNet
    • Mobus TCP compatible
    • Modbus RTU compatible
  4. Module: various input/output modules, power module
    • Bus power + Field power, Bus power/Field power, digital input/output (4/8/16 channels), analog input/output (2/4/8 channels), temperature input (4/8 channels)
    • Expandable up to 64 modules (may vary by communication type)
  5. Hot-swap feature: Terminal and body units can be removed/swapped during operation for easy maintenance
  6. Push-in connection method: easy wire connection without requiring additional tools
  7. Easy module attachment and removal on DIN rails
  8. Comprehensive device management software DAQMaster for improved convenience
    • Module settings, real-time control/monitoring/diagnosis of input/output signals
    • Virtual mode allows simulation of product set up and offers set up recommendations
Add To Cart
Data Sheet
Details
Specification

Autonics ARIO Series adalah sistem Slim Modular Remote I/O yang dirancang untuk mempermudah distribusi sinyal I/O pada sistem otomasi industri dan Smart Factory. Seri ini mendukung berbagai protokol komunikasi Industrial Ethernet dan Fieldbus seperti EtherCAT, PROFINET, PROFIBUS, EtherNet/IP, CC-Link, DeviceNet, Modbus TCP, dan Modbus RTU, sehingga mudah diintegrasikan dengan PLC maupun Industrial PC dari berbagai merek.

‍

Dengan arsitektur modular, ARIO terdiri dari communication coupler dan berbagai pilihan I/O module yang dapat dikonfigurasi sesuai kebutuhan aplikasi. Sistem ini mendukung ekspansi hingga 64 modul, termasuk digital input/output, analog input/output, temperature input, serta power module, sehingga memberikan fleksibilitas tinggi untuk berbagai kebutuhan kontrol industri.

‍

ARIO Series dilengkapi push-in wiring untuk mempercepat instalasi tanpa alat tambahan, serta hot-swap function yang memungkinkan penggantian modul tanpa mematikan daya atau komunikasi sistem. Dukungan software DAQMaster juga memudahkan konfigurasi, monitoring, diagnosis, dan simulasi sistem sehingga commissioning menjadi lebih cepat dan efisien.

‍

Dengan desain slim, pemasangan pada DIN rail, serta dukungan berbagai protokol komunikasi industri, Autonics ARIO Series menjadi solusi Remote I/O yang ideal untuk aplikasi manufaktur, machine automation, material handling, dan sistem Smart Factory yang membutuhkan fleksibilitas, keandalan, dan kemudahan ekspansi.

Technical Specifications — Autonics ARIO Series
Couplers
Protection Circuit Reverse field and supply power protection circuit
Power Supply ARIO unit: ≤ 9.6 W, ≤ 400 mA (≤ 200 mA/CH, 2-CH/COM)
Field: ≤ 96 W, ≤ 4,000 mA (≤ 2,000 mA/CH, 2-CH/COM)
Supply Voltage Coupler input voltage: 24 VDC
ABUS supply voltage: 5 VDC, ≤ 960 mA
Field supply voltage: 24 VDC
Current Consumption Standby and run mode: 200 mA
Maximum load: 400 mA (at coupler max. load)
CONFIG Port USB 2.0 Type Micro B
Transmission Speed (ABUS) 4 Mbps
Indicator Coupler status indicator, field network status indicator
Material Terminal: PBT, Body: PC, Base: PA6, POM
Installation Method DIN Rail 35 mm
Unit Weight (Packaged) ≈ 165 g (≈ 265 g)
Digital Input / Output Modules
Transmission Speed (ABUS) 4 Mbps
Protection Circuit Digital input module: Reverse field power protection circuit
Digital output module: Reverse field power protection circuit, output short circuit protection circuit
Insulation I/O to internal circuit: Photocoupler insulated
Indicator Module status indicator (green, red), channel status indicator (green)
Material Terminal: PBT, Body: PC, Base: PA6, POM
Installation Method DIN Rail 35 mm
Unit Weight (Packaged) ≈ 75 g (≈ 108 g)
Analog Input / Output Modules
Transmission Speed (ABUS) 4 Mbps
Protection Circuit Analog input module: Reverse field power protection circuit
Analog output module: Reverse field power protection circuit
Insulation I/O to internal circuit: Photocoupler insulated / Between channels: Non-insulated
Indicator Module status indicator (green, red), channel status indicator (green)
Material Terminal: PBT, Body: PC, Base: PA6, POM
Installation Method DIN Rail 35 mm
Unit Weight (Packaged) ≈ 75 g (≈ 108 g)
Temperature Input Modules
Transmission Speed (ABUS) 4 Mbps
Protection Circuit Reverse field power protection circuit
Insulation I/O to internal circuit: Photocoupler insulated / Between channels: Non-insulated
Indicator Module status indicator (green, red), channel status indicator (green)
Material Terminal: PBT, Body: PC, Base: PA6, POM
Installation Method DIN Rail 35 mm
Unit Weight (Packaged) ≈ 75 g (≈ 108 g)
Power Modules
Transmission Speed (ABUS) 4 Mbps
Protection Circuit Reverse bus power protection circuit, Bus power short circuit protection circuit
Indicator Power status indicator (green)
Material Terminal: PBT, Body: PC, Base: PA6, POM
Installation Method DIN Rail 35 mm
Unit Weight (Packaged) ≈ 75 g (≈ 108 g)
Environmental Conditions
Insulation Resistance ≥ 100 MΩ (500 VDC megger)
Dielectric Strength Between charging part and case: 1000 VAC 50/60 Hz for 1 min
Noise Immunity ±500 VDC square wave noise (pulse width: 1 μs) by noise simulator
Vibration 0.7 mm double amplitude at frequency of 10 to 55 Hz in X, Y, Z direction for 1 hour
Vibration (Malfunction) 0.5 mm double amplitude at frequency of 10 to 55 Hz in X, Y, Z direction for 10 min
Shock 300 m/s² (≈ 30 G) in X, Y, Z direction for 3 times
Shock (Malfunction) 100 m/s² (≈ 10 G) in X, Y, Z direction for 3 times
Ambient Temperature -10 to 55 ℃, Storage: -25 to 70 ℃ (No freezing or condensation)
Ambient Humidity 35 to 85 %RH, Storage: 35 to 85 %RH (No freezing or condensation)
Protection Rating IP20 (IEC Standard)

* Specifications are subject to change without prior notice. Please refer to the official Autonics datasheet for the latest technical information.