Name: UTR Sensor
Brand: AUTONICS

Autonics UTR Series merupakan Cylindrical Ultrasonic Sensor yang menggunakan teknologi gelombang ultrasonik untuk mendeteksi keberadaan objek dan mengukur jarak secara presisi, tanpa terpengaruh oleh warna, bentuk, maupun transparansi material. Sensor ini dapat digunakan untuk berbagai aplikasi seperti presence detection, pengukuran level cairan, material padat, dan powder.

‍

Dengan pilihan housing M18 dan M30, UTR Series menawarkan rentang sensing distance hingga 8 meter sesuai model yang digunakan. Sensor ini dilengkapi fitur temperature compensation otomatis/manual dan detection width conversion untuk menjaga akurasi pengukuran pada berbagai kondisi lingkungan.

‍

UTR Series tersedia dengan berbagai opsi output seperti Push-Pull digital output, analog output, serta model dengan dukungan IO-Link untuk konfigurasi dan monitoring yang lebih mudah. Pengaturan parameter dan pemantauan status sensor juga dapat dilakukan menggunakan programming unit UT-P atau software khusus atDistance.

‍

Dengan desain industri yang kuat menggunakan material stainless steel 316L, indikator operasi ring 360°, serta perlindungan hingga IP69K (tergantung model), Autonics UTR Series Ultrasonic Sensor menjadi solusi ideal untuk aplikasi otomasi industri yang membutuhkan deteksi stabil, fleksibel, dan akurat.

‍

Technical Specifications — Autonics UTR Series Ultrasonic Sensor
General
Model	UTRCM18-350	UTRCM18-600	UTRCM18-1300	UTRCM30-8M
Sensing Distance	30 to 350 mm	65 to 600 mm	120 to 1300 mm	600 to 8000 mm
Blind Zone	0 to 27 mm	0 to 59 mm	0 to 115 mm	0 to 590 mm
Foreground Suppression	30 to 90 mm	65 to 195 mm	120 to 360 mm	600 to 1800 mm
Max. Setting Zone	350 mm	600 mm	1300 mm	8000 mm
Transducer Frequency	305 kHz	305 kHz	200 kHz	80 kHz
Switching Frequency	≥ 25 Hz	≥ 12.5 Hz	≥ 10 Hz	≥ 3 Hz
Response Time	≤ 32 ms	≤ 64 ms	≤ 100 ms	≤ 300 ms
Hysteresis	3 mm	5 mm	20 mm	100 mm
Standard Sensing Target	Aluminum 200 × 200 mm	Aluminum 200 × 200 mm	Aluminum 200 × 200 mm	Aluminum 500 × 500 mm
Resolution	≥ 0.069 mm	≥ 0.069 mm	≥ 0.175 mm	≥ 0.180 mm
Accuracy	±1% F.S.
Repeat Accuracy	±0.15% F.S.
Weight (Packaged)	≈30 g (≈85 g)	≈30 g (≈85 g)	≈32 g (≈90 g)	≈210 g (≈330 g)
Electrical
Power Supply	12–30 VDC (Ripple P-P ≤10%)
Current Consumption	≤40 mA	≤40 mA	≤45 mA	≤80 mA
Digital Output	Push-Pull
Load Voltage	≤30 V
Load Current	≤100 mA
Residual Voltage	≤3 V
Analog Output
Analog Output	Current Output: DC 4–20 mA / Voltage Output: DC 0–10 V
Load Resistance	Current Output: 12–20 VDC ≤100 Ω / 20–30 VDC ≤500 Ω Voltage Output: 12–30 VDC ≥100 kΩ
Protection & Electrical Safety
Protection Circuit	Surge protection circuit, output short over-current protection circuit, reverse polarity protection
Insulation Resistance	≥50 MΩ (500 VDC Megger)
Dielectric Strength	Between charging part and case: 1,000 VAC, 50/60 Hz for 1 minute
Environmental
Vibration	1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock	500 m/s² (≈50 G) in each X, Y, Z direction for 3 times
Ambient Temperature	-25 to 70 ℃ Storage: -40 to 85 ℃ (No freezing or condensation)
Protection Rating	IP66, IP67, IP69K	IP66, IP67, IP69K	IP66, IP67, IP69K	IP66, IP67
Mechanical
Connection	Connector Models
Connector Specification	M12 5-pin Plug Connector
Case Material	SUS316L Stainless Steel
Body Material	PC
Transducer Material	Polyurethane Foam, Epoxy Resin with Glass
Certification
Certification	CE, IO-Link

01) If a sensing target is detected over the blind zone and below the foreground suppression range, the distance value is displayed as the foreground suppression value.
02) Parameters can be configured using the sensor settings or the dedicated atDistance software.
03) Accuracy specified at ambient temperature 25 ℃ (temperature characteristic: ±0.1% F.S./℃).

* Specifications are subject to change without prior notice. Please refer to the official Autonics datasheet for the latest technical information.